3. Thermal Ageing of PWR steels

Microstructure degradation of austenitic stainless steels after 45 years of operation as VVER-440 reactor internals

Analysis of thermal embrittlement of a low alloy steel weldment using fracture toughness and microstructural investigations

Simulation of tube rupture in steam generator and transient analysis of VVER-1200 using PCTRAN

Conventional austenitic steels as out-of-core materials for Generation IV nuclear reactors

Investigation of high temperature annealing effectiveness for recovery of radiation-induced structural changes and properties of 18Cr–10Ni–Ti austenitic stainless steels

Simulation of thermal fatigue damage in a 316L model pipe component

Low-temperature mechanical properties of Fe–0.06C–18Cr–10Ni–0.4Ti austenitic steel determined using ring-pull tensile tests and microhardness measurements

TEMPERATURE CHANGES AND THERMAL STRESSES IN A STEAM GENERATOR AND PRESSURIZER PRESSURE VESSELS ARISEN DURING OPERATION OF THE WER NUCLEAR POWER PLANT

Atom Probe Studies of the Fe–Cr System and Stainless Steels Aged at Intermediate Temperature

Characterization of the hot deformation microstructure of AISI 321 austenitic stainless steel

Lifetime prediction on stainless steel components under thermal fatigue load

Investigation of Microstructure and Mechanical Properties of 18Cr-10Ni-Ti Steel Irradiated in the Core of VVER-1000 Reactor

Thermal ageing mechanisms of VVER-1000 reactor pressure vessel steels

A Mossbauer Study of Austenitic Steel Origimating from the Steam Generator of a VVER-440 Type Nuclear Reactor, Paks, Hungary

Aging of materials of the equipment of nuclear power plants after designed service life

Damage Mechanisms of Stainless Steels under Thermal Fatigue

The influence of prolonged exposure to operating temperatures and strain aging on the material properties of nuclear power plant reactor vessels and pipings

Evaluation of the Effects of Thermal Aging of Austenitic Stainless Steel Welds Using Small Punch Test

Effects of thermal aging on the fracture toughness of cast stainless steel CF8

A comprehensive study of the effects of long-term thermal aging on the fracture resistance of cast austenitic stainless steels

Degradation of impact toughness in cast stainless steels during long-term thermal aging

Structural MATerias research on parameters influencing the material properties of RPV steels for safe long-term operation of PWR NPPs

Study of the influence of long-term high-temperature operation on the structure and properties of austenitic chromium-nickel-molybdenum steel

Fatigue and cyclic inelasticity of austenitic steel upon long-term operation under various loading conditions

Fracture toughness of welded joints materials for main pipelines at Ignalina NPP

Low cycle thermomechanical fatigue of VVER-440 reactor pressure vessel steels: Investigation the fatigue kinetics and development of a life assessment model

Strain-amplitude dependent cyclic hardening of 08Ch18N10T austenitic stainless steel

Strain Range Dependent Cyclic Hardening of 08Ch18N10T Stainless Steel—Experiments and Simulations

Aging and life prediction of cast duplex stainless steel components

Determination of crack arrest toughness for Russian light water reactor pressure vessel materials

A coupled stress analysis of the steam generator tube considering the influence of the fluid flow and heat transfer in the primary and secondary sides